미래 지향적인 기계, 기구(Mechanism), 소프트웨어, 기계시스템의 해석과 설계 연구를 수행하는 그룹
새로운 설계이론 및 총합 기술의 개발, 역학 및 해석기술, 신소재의 응용 및 설계 데이터 베이스화 연구 수행

1Design

    1. 연구주제
      • 기계시스템의 혁신과 창조
      • 생체운동 시뮬레이션
      • 새로운 설계이론 및 기술 개발, 모델 수립 및 구성 방정식에 관한 연구
      • 기계시스템을 위한 새로운 재료의 개발과 응용
      • 혁신적인 시스템 해석 및 설계 프로그램
      • 마찰 시스템 시뮬레이션
      • 해양 시스템 설계 및 생산 공학
    2. 주요장비
      • 다축 인장 피로 시험기, 고속 인장 시험기, 홉킨슨 바 시험기, 테일러 충격 시험기
      • 고속 인장 마이크로 시험기, 고속 충격 시험기, 동전형 피로시험기
      • Ball on disk 마찰 마모 실험 장비, 점촉각 측정 장비, 점착력 측정 장비
      • DMA 기구, 유전체를 탑재한 컴퓨터화 가압 멸균 처리기
      • 레이저 스캐너, Portable CMM, 디스크 레이저 시스템, 적외선 국부 가열기, 100 ton 핫 프레스
      • 원자력 현미경 (AFM), Delaminator, Dynamic mechanical analyzer
      • 만능재료시험기, 연료전지 스테이션
      • CyberGlobe Tracker, Hurricane2 Wind Machine, 멀티 채널 스크린, Motion Platform
    3. 최근논문
        • Kim, Kyung-Woong, Tribological characteristics of Cr/CrN/a-C:H:w/a-C:H coating under boundary lubrication conditions with glycerol mono-oleate(GMO) and molybdenum dithiocarbamate (MoDTC), Wear (2015)
        • Kim, Kyung-Woong, Effects of sliding velocity and ambient temperature on the friction and wear of a boundary-lubricated, multi-layered DLC coating, Wear (2014)
        • Kim, Kyung-Woong, Effect of surface non-flatness on the lubrication characteristics in the valve part of a swash-plate type axial piston pump, Meccanica (2014)
        • Kim, Taek-Soo, Flexible, Highly Efficient All-Polymer Solar Cells, Nature Communications (2015)
        • Kim, Taek-Soo, Enhancing Adhesion of Screen-Printed Silver Nanopaste Films, Advanced Materials Interfaces (2015)
        • Kim, Taek-Soo, Warpage Analysis of Electroplated Cu Films on Fiber-Reinforced Polymer Packaging Substrates, Polymers, (2015)
        • Kim, Taek-Soo, Direct Observation of Nanoscale Pt Electrode Agglomeration at the Triple Phase Boundary, ACS Applied Materials & Interfaces (2015)
        • Kim, Taek-Soo, Adhesion Improvement of Graphene/Copper Interface using UV/Ozone Treatments, Thin Solid Films (2015)
        • Kim, Taek-Soo, Effects of hydrophobic agent content in macro-porous substrates on the fracture behavior of the gas diffusion layer for proton exchange membrane fuel cells, Journal of Power Sources (2015)
        • Kim, Taek-Soo, Adhesion improvement of silicon/underfill/polyimide interfaces by UV/ozone treatment and sol-gel derived hybrid layers, Microelectronics Reliability (2014)
        • Kim, Taek-Soo, Penetration and Lateral Diffusion Characteristics of Polycrystalline Graphene Barriers, Nanoscale (2014)
        • Na, Suck-Joo, Arc behavior in two wire tandem submerged arc welding process, Journal of Materials Processing technology (2014)
        • Na, Suck-Joo, Numerical simulation of full penetration laser welding of thick steel plate with high power high brightness laser, Journal of Materials Processing technology (2014)
        • Na, Suck-Joo, Molten pool behavior in tandem submerged arc welding process, Journal of Materials Processing technology (2014)
        • Na, Suck-Joo, Relation of joint strength and polymer molecular structure in laser assisted metal and polymer joining, Science and Technology of Welding and Joining (2014)
        • Na, Suck-Joo, Arc interaction and molten pool behavior in the three wire submerged arc welding process, International Journal of Heat and Mass Transfer (2015)
        • Na, Suck-Joo, Molten pool behaviors for second pass V-groove GMAW, International Journal of Heat and Mass Transfer (2015)
        • Na, Suck-Joo, Weld root instabilities in fiver laser welding, Journal of Laser Applications (2015)
        • Na, Suck-Joo, Thermal metallurgical analysis of GMA welded AH36 steel using CFD-FEM framework, Journal of Materials and Design (2016)
        • Na, Suck-Joo, CFD simulations of GMA welding of horizontal fillet joints based on coordinate rotation of arc models, Journal of Materials Processing Technology (2016)

      • Youn, Sung-Kie, A hierarchically superimposing local refinement method for isogeometric analysis, International Journal of Computational Methods (2014)
      • Youn, Sung-Kie, Spline-Based Meshfree Method with Extended Basis, Computer Aided Geometric Design (2014)
      • Youn, Sung-Kie, A gap element for treating non-matching discrete interfaces, Computational Mechanics (2015)
      • Youn, Sung-Kie, Isogeometric analysis of topologically complex shell structures, Finite Elements in Analysis and Design (2015)
      • Youn, Sung-Kie, Eulerian analysis of bulk metal forming processes based on spline-based meshfree method, Finite Elements in Analysis and Design (2015)
      • Youn, Sung-Kie, Isogeometric shape optimization of trimmed shell structures, Structural and Multidisciplinary Optimization (2015)
      • Youn, Sung-Kie, Viscoelastic constitutive modelling of solid propellant with damage, International Journal of Solids and Structures (2015)
      • Yoon, Jeong Whan, Asymmetric yield function based on the stress invarients for pressure senstive matels, International Journal of Plasticity (2014)
      • Yoon, Jeong Whan, Editorial : In honor of Kwansoo Chung, International Journal of Plasticity (2014)
      • Yoon, Jeong Whan, Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality, International Journal of Plasticity (2014)
      • Yoon, Jeong Whan, Supression of necking in incremental sheet forming, International Journal of Solids and Structures (2014)
      • Yoon, Jeong Whan, Study on yield function and plastic potential under non-associated flow for accurate earing prediction in cup drawing, Steel Research International (2015)
      • Yoon, Jeong Whan, Wrinkling during cup drawing with NUMISHEET2014 benchmark test, Steel Research International (2015)
      • Yoon, Jeong Whan, Necking behavior of AA 6022-T4 based on the crystal plasticity and damage models, International Journal of Plasticity (2015)
      • Yoon, Jeong Whan, Metal forming- Challenges in constitutive and fracture modeling, International Journal of Plasicity (2015)
      • Lee, Dai Gil, Glass composite vibration isolating structure for the LNG cargo containment system, Composite Structures (2014)
      • Lee, Dai Gil, composite low-observable radome composed of E-glass/aramid/epoxy composite sandwich construction and frequency selective surface, Composite Structures (2014)
      • Lee, Dai Gil, Method for exposing carbon fibers on composite bipolar plates, Composite Structures (2015)
      • Lee, Byung Chai, Development of a strain- smoothed three node triangular flat shell element with drilling degrees of freedom, Finite Elements in Analysis and Design (2014)
      • Lee, Byung Chai, Second-order reliability method based inverse reliability using Hessian update for accurate and efficient reliability based design optimization, International Journal for Numerical Methods in Engineering (2014)
      • Lee, Byung Chai, A semi-single-loop method using approximation of most probable point for reliability based design optimization, Structural and Multidisciplinary Optimization (2015)
      • Lee, Byung Chai, Higher-order virtual node method for polygonal elements and application of h-adaptivity, International Journal of Numerical Methods and Applications (2015)
      • Lee, Soon-Bok, Double-Layer CVD Graphene as Stretchable Transparent Electrodes, Nanoscale (2014)
      • Lee, Soon-Bok, Warpage Behavior and Life Prediction of a Chip-on-Flex Package Under a Thermal Cycling Condition, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING (2014)
      • Lee, Soon-Bok, A comparison of methods for predicting the fatigue life of gray cast iron at elevated temperatures, Fatigue and Fracture of Engineering Materials and Structures (2015)
      • Lee, Ikjin, Sampling-based approach for design optimization in the presence of interval variables, Journal of Structural and Multidisciplinary Optimization (2014)
      • Lee, Ikjin, Reliability-based vehicle safety assessment and design optimization of roadway radius and speed limit in windy environments, Journal of Mechanical Design (2014)
      • Lee, Ikjin, Probabilistic sensitivity analysis for novel second-order reliability method using generalized chi- squared distribution, Journal of Structural and Multidisciplinary Optimization (2014)
      • Lee, Ikjin, Second- order reliability method-based inverse reliability analysis using hessian update for accurate and efficient reliability- based design optimization, International Journal for Numerical Methods in Engineering (2014)
      • Lee, Ikjin, Post optimization using second-order reliability method based on importance sampling and its stochastic sensitivity analysis, International Journal for Numerical Methods in Engineering (2015)
      • Lee, Ikjin, Reliability analysis and reliability-based design optimization of roadway horizontal curves using a first-order reliability method, Journal of Engineering Optimization (2015)
      • Lee, Phill-Seung, Recent advances in ocean nuclear power plants, Energies (2015)
      • Lee, Phill-Seung, Hydroelastic analysis of floating structures with liquid tanks and comparison with experimental tests, Applied Ocean Research (2015)
      • Lee, Phill-Seung, An enhanced Craig-Bampton method, International Journal for Numerical Methods in Engineering (2015)
      • Lee, Phill-Seung, The modal behavior of the MITC3+ triangular shell element, Computers and Structures (2015)
      • Lee, Phill-Seung, The MITC3+ shell element in geometric nonlinear analysis, Computers and Structures (2015)
      • Lee, Phill-Seung, Nonlinear performance of continuum mechanics based beam elements focusing on large twisting behaviors, Computer Methods in Applied Mechanics and Engineering (2014)
      • Lee, Phill-Seung, An accurate error estimator for Guyan reduction, Computer Methods in Applied Mechanics and Engineering (2014)
      • Lee, Phill-Seung, The MITC3+ shell finite element and its performance, Computers and Structures (2014)
      • Im, Seyoung, Mechanical strength characteristics of asymmetric tilt grain boundaries in graphene, Carbon (2014)
      • Im, Seyoung, A new three-dimensional variable-node finite element and its application for fluid?solid interaction problems, Computer Methods in Applied Mechanics and Engineering (2014)
      • Im, Seyoung, Energy release rate in the presence of residual and thermal stresses, International Journal of Solid and Structures (2015)
      • Im, Seyoung, A node-to-node scheme with the aid of variable-node elements for elasto-plastic contact analysis, International Journal for Numerical Methods in Engineering (2015)
      • Im, Yong-Taek, Numerical study of prior deformation history on texture evolution during equal channel angular pressing, Computational Materials Science (2014)
      • Im, Yong-Taek, The effect of the multi-pass non-circular drawing sequence on mechanical properties and microstructure evolution of low-carbon steel, Materials & Design (2014)
      • Im, Yong-Taek, The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire, Materials & Design (2014)
      • Im, Yong-Taek, The effect of processing parameters on elastic deformation of the coil during the thin-strip coiling process, Metals and Materials International (2014)
      • Im, Yong-Taek, Three-dimensional crystal plasticity finite element analysis of microstructure and texture evolution during channel die compression of IF steel, Computational Materials Science (2015)
      • Im, Yong-Taek, Process on mechanical properties, microstructure and texture evolutions of low-carbon steel wires, Metals and Materials International (2015)
      • Chung, Hyun, Stochastic assessment considering process variation for impact of welding shrinkage on cost of ship production, International Journal of Production Research (2014)
      • Chung, Hyun, Arctic sea route path planning based on uncertain ice prediction model, Cold Region Science and Technology (2015)
      • Chung, Hyun, Variation simulation of compliant metal plate assemblies considering welding distortion, Journal of Manufacturing Science and Engineering (2015)
      • Chung, Hyun, Alternating current-gas metal arc welding for application to thick plates, Journal of Materials Processing Technology (2015)
      • Chung, Hyun, Simplified welding distortion analysis for fillet welding using composite shell element, International Journal of Naval Architecture and Ocean Engineering (2015)
      • Han, Soonhung, A framework for automatic creation of motion effects from theatrical motion pictures, Multimedia Systems (2014)
      • Han, Soonhung, Automatic 3D city modeling using a digital map and panoramic images from a mobile mapping system, Mathematical Problems in Engineering (2014)
      • Han, Soonhung, Simplification of feature-based 3D CAD assembly data of ship and offshore plant equipment using quantitative evaluation metrics, Computer-Aided Design (2015)
      • Han, Soonhung, Editing 3D models on smart devices, Computer-Aided Design (2015)
      • Han, Soonhung, Graph-based simplification of feature-based three-dimensional computer-aided design models for preserving connectivity, Journal of Computing and Information Science in Engineering (2015)
      • Han, Soonhung, Cluster rendering on large high-resolution multi-displays using X3DOM and HTML, Multimedia Systems (2015)
      • Huh, Hoon, Fracture modelling of DP780 sheets using a hybrid experimental-numerical method and two-dimensional digital image correlation, International Journal of Materials and Product Technology (2014)
      • Huh, Hoon, Dynamic failure characterization of laser welds under combined loading conditions, International Journal of Automotive Technology (2014)
      • Huh, Hoon, Evaluation of Dynamic Hardening Models for BCC, FCC, and HCP Metals at a Wide Range of Strain Rates, Journal of Materials Processing Tech. (2014)
      • Huh, Hoon, Standard uncertainty evaluation for dynamic tensile properties of auto-body steel-sheets, Experimental Mechanics (2014)
      • Huh, Hoon, Anisotropy Effect on The Fracture Model of DP980 Sheets Considering The Loading Path, International Journal for Automotive Technology (2015)
    4. 연구진

      양민양Manufacturing Technology
      Printed Electronics
      Precision Machine Design에자일 테크놀로지 연구실

      교수 연구주제 연구실
      김경웅 Tribology
      Fluid Film Lubrication
      Precision Machine Element Design
      Solid Coating and Surface Texturing
      Nano-Tribology
      정밀기계요소 및 트라이볼로지 연구실
      김택수 Mechanical properties of advanced packaging and thin films 차세대 패키징 및 박막 연구실
      나석주 Laser, Arc, and Hybrid Welding
      Laser Micro Processing
      CFD Simulation of Weld Pool
      TEP Analysis of Welded Structure
      Friction Stir Welding
      Selective Laser Sintering
      레이저 및 플라즈마 응용 연구실
      윤성기 Computational Solid Mechanics
      Design Topology Optimization
      Opto-Mechanics
      Constitutive Modeling of Rubber-like Materials
      시스템 전산 해석 및 설계 연구실
      윤정환 Mechanics & Materials
      Materials Processing & Characterization
      컴퓨터원용 정형가공 연구실
      이대길 Cryogenic Containment System for LNG
      PEM Fuel Cell
      Stealth Technology
      신소재 응용 기계설계 연구실
      이병채 Finite Element Techniques
      Analysis and Design of Structures
      Reliability-based Design Optimization
      전산 구조해석 및 설계 연구실
      이순복 Reliability of Thin Film and Electronic Packaging
      Bulk&Nano Materials Characterization
      Micro-Nano Measurement
      전산원용 신뢰성평가 연구실
      이익진 Simulation-based Design under Uncertainty
      Statistical Input/Output Identification
      System Reliability Assessment
      최적 설계 연구실
      이필승 Structural Systems
      Fluid-Structure Interaction
      Computational Mechanics
      Experimental Biology
      전산역학 및 구조시스템 연구실
      임세영 Computational Nanotechnology
      Development of Multi-Physics Codes
      다중 물리 시스템 연구실
      임용택 Computer Aided Materials Processing
      Friction Characterization
      Development of Nano Bulk Material through Severe Plastic Deformation
      전산 재료 성형 설계 연구실
      정현 Production System Engineering
      Welding and Joining Process
      Tolerance Analysis and Design
      Design Optimization
      Production Planning and Optimization
      Artificial Intelligence Applications for Ocean System
      Discrete Event Simulation
      설계 및 생산 시스템 연구실
      한순흥 CAD (Computer Aided Design)
      STEP (ISO Standards for the Exchange of Product Model Data)
      VR (Virtual Reality) for engineering design
      Knowledge-based design system
      Collaborative CAD
      iCAD (intelligent Computer Aided Design) 연구실
      허훈 Computational Solid Mechanics
      Plasticity and Numerical Analysis
      High-Speed Material Characterization
      Failure and Impact Analysis for Design
      Sheet Metal Forming
      Crashworthiness and Autobody Design
      Ductile fracture criterion
      설계 및 생산 시스템 연구실